An old, rusted kitchen sink with persistent leaks and poor drainage was replaced with a modern double-bowl stainless steel unit. The team carefully removed the damaged sink, cleaned and prepared the countertop surface, and installed the new unit with proper alignment.
New drainage pipes and fittings were connected, and waterproof sealant was applied around all joints to prevent future leaks. The water supply lines were tested, ensuring smooth flow and no leakage. The area was cleaned thoroughly after installation, leaving the kitchen fully functional and looking refreshed.
The entire job was completed in under three hours with minimal disruption.
The existing lighting setup was outdated and provided uneven illumination throughout the living room. The project involved removing old ceiling fixtures and installing modern LED downlights with a dimmable switch system.
Wiring was inspected and upgraded where necessary to support the new fixtures. The lights were evenly spaced for optimal coverage, and all electrical connections were tested for safety and performance. A clean, modern finish was achieved without damaging the ceiling paint or décor.
The upgrade enhanced both the look and energy efficiency of the space, completed within a few hours.
Several visible cracks had appeared on interior walls due to seasonal expansion and settling. The team began by assessing the depth and spread of the cracks, then carefully cleaned and filled them using high-strength filler for durability.
Once dried, the repaired areas were sanded smooth to match the surrounding wall surface. A fresh coat of primer and matching paint was applied to blend the repairs seamlessly into the existing finish.
The result was a smooth, flawless wall surface, all completed within a single day.
A main door was misaligned and difficult to close, with a loose lock that compromised security. The repair began by adjusting the door hinges for proper alignment and smooth movement without scraping the frame.
The old lock was removed and replaced with a high-quality cylinder lock, fitted securely and tested for smooth operation. Minor cracks around the frame were filled and retouched for a clean finish. The entire process was completed without damaging the door or paint.
The door was fully restored to proper function, improving both convenience and home security.
